Technical data
Technical data - KNX-GW2-IP-2TE
|
|
Operating voltage | 9 .. 30VDC max. 1.5W 2-pole screw terminal |
Bus voltage connection | KNX 2-pole terminal (red / black) |
Power consumption (KNX) | ca. 120mW ( bei 24VDC ) |
Ambient temperature | Storage -25 .. + 85 ° C Operation -25 . + 55 ° |
|
|
Ethernet | 10/100 Mbit/s RJ45 |
USB | Ethernet-Over USB Device |
|
|
Protection class | IP20 |
Montage | DIN rail mounting |
Housing | Plastic REG housing 2TE (35 mm) black |
Article | 40400003 |
###Bild:860###
With the integrated KNX group monitor it is possible to monitor
or send telegrams on the KNX bus in real time.
The side of the KNX group monitor is divided into a
configuration area and a telegram area.
The KNX IP gateway is able to save telegrams.
The KNX telegram logger lists the stored telegrams.
Both the time period and the group addresses can be filtered for this.
Up to three different group addresses can be output in a graph
to visualize the data.
The gateway can link HTML pages with KNX data and
visualize them on any browser, provided it supports web sockets.