Our M-Bus KNX Gateways enable the integration of M-Bus devices into a KNX bus system. They serve as the link for connection and data transmission between M-Bus meters (water, electricity, energy, etc.) and the KNX bus. The devices allow the connection and reading of up to three M-Bus devices and support up to 32 data points.
Key Features
- Up to 32 Data Points
For monitoring consumption, measurement values, as well as date and time - Date Information
Processes up to 3 date entries from M-Bus devices - Special Functions
Provides 3 data points for specific functions and customizations - Status Monitoring
One data point for displaying device status - M-Bus ID
- One data point for setting the M-Bus ID for connected devices (only for SK10, REG)
- Handles data from up to three M-Bus devices independently of their ID (SK08 only)
KNX-GW-MBUS-REG
The KNX M-Bus gateway is a Master for M-Bus systems according to the DIN EN 13757-2/3.
The Master can supply and service up to 3 M-Bus devices.
There are 32 M-Bus data points available, which can be assigned freely to the different devices.
The gateway is suitable for DIN rail mounting (2TE).
KNX-GW-MBUS-SK10
The KNX M-Bus gateway is a Master for M-Bus systems according to the DIN EN 13757-2/3.
The Master can supply and service up to 3 M-Bus devices.
There are 32 M-Bus data points available, which can be assigned freely to the different devices.
In SK10 housing (on-wall)
KNX-GW-MBUS-SK08
The M-Bus gateway is a Master for M-Bus systems according to the DIN EN 13757-2/3.
The Master can supply and service up to 3 M-Bus devices.
There are 32 M-Bus data points available, which can be assigned freely to the different devices.
This enables device detection independent of the M-Bus ID (broadcast addressing).
