KNX-IP-Gateway

The KNX-GW-II-IP-2TE is used to couple the ETS 
(PC software tool) via Ethernet to the KNX bus for addressing
 and programming KNX components.
With the integrated KNX group monitor it is possible to monitor
or send telegrams on the KNX bus in real time. 
The side of the KNX group monitor is divided into a 
configuration area and a telegram area.
The KNX IP gateway is able to save telegrams. 
The KNX telegram logger lists the stored telegrams. 
Both the time period and the group addresses can be filtered for this.
Up to three different group addresses can be output in a graph 
to visualize the data.
The gateway can link HTML pages with KNX data and 
visualize them on any browser, provided it supports web sockets.

 
Operating voltage: 			9 .. 30VDC max.1.5W 2-pole screw terminal
Bus voltage connection 		KNX 2-pin terminal (red / black)
Power consumption (KNX) 		approx. 120mW (at 24VDC)
Ambient temperature, storage 		-25 .. + 85 ° C
Operation 			-25 .. + 55 ° C
Ethernet 				10/100 Mbit / s RJ45
USB 				Ethernet-Over USB Device
Degree of protection 		IP20
				DIN rail mounting
Housing 				plastic REG housing 2TE (35 mm) black
Manufacturer 			arcus-eds gmbh
Item number 			40400003