Versatile System Integration with our KNX Gateways
Our KNX gateways integrate various systems such as DMX, RS232, RS485, Modbus, MBus, HAN, and P1 into your KNX system. They ensure reliable communication and control over the KNX bus for lighting control, heating and ventilation regulation, as well as energy monitoring and management.Thanks to their interoperability, they offer flexible solutions for complex installation requirements and support the expandability of your system.
DMX KNX Gateway
KNX to DMX – Flexible Lighting Control with the KNX DMX Gateway: Our KNX DMX Gateway is an interface between the KNX bus and the DMX512 bus, specifically designed for integrating lighting and special effects technology in event venues into modern building automation systems.
- Full Control of DMX Actuators
The gateway allows control of up to 512 DMX channels directly via the KNX bus. Up to 64 scenes and 16 sequences can be programmed - Flexibility
The number of channels and scenes used is scalable and can be tailored to project requirements - User-Friendly Configuration
The associated configuration tool makes it easy to create and adjust projects. Configuration data can be exported as XML files and imported into the ETS - Scenes and Sequences
Enables easy recall and dimming of scenes, as well as the creation and execution of sequences with adjustable transition times - Expert Settings
Advanced users can fine-tune the DMX signal layout and timing parameters to ensure optimal performance - Reliable Hardware
The device is designed for DIN rail installation and is available in two widths (6 TE / 2 TE)
Technical Specifications and Datasheets can be found here:
Here you can request a non-binding offer:
KNX RS232 / KNX RS485 Gateway
Our KNX RS232 / KNX RS485 Gateway connects KNX building automation with devices that utilize the serial communication protocols RS232 and RS485. It enables control and monitoring across various applications, from industrial systems to entertainment electronics.
Key Features:
- Bidirectional Communication
Converts KNX telegrams to serial commands and vice versa. - Customizable Commands
Stores up to 1,200 serial commands for tailored communication configurations. - Configurable Interfaces
Supports both RS232 and RS485 with customizable serial settings. - Macro Support
Allows the creation and management of macros to automate complex tasks. - Flexible Programming
Enables programming of individual applications via USB with configuration software. - Integrated Testing Tools
Includes functions for testing and validating communication strings with terminal programs.
Technical Specifications and Datasheets can be found here:
Here you can request a non-binding offer:
MODBUS KNX Gateway
Our MODBUS KNX Gateway is a gateway designed to integrate Modbus/RTU devices into a KNX bus system. It facilitates the connection and evaluation of Modbus data points via KNX and supports both RS485 and RS232 communication interfaces.
Key Features
- Data Points
Up to 32 Modbus data points, flexibly assignable to devices - Communication Interfaces
RS485 (up to 31 devices) or RS232 (P2P), selectable at the time of order - Parameterization
Configurable via ETS (KNX Tool Software) - Cycle Times
Adjustable for Modbus reading and KNX writing cycles - Error Monitoring
Timeout settings for transmission errors - Data Conversion
Adjustable multipliers and offsets for Modbus data
Technical Specifications and Datasheets can be found here:
Here you can request a non-binding offer:
M-Bus KNX Gateway
Our M-Bus KNX Gateways enable the integration of M-Bus devices into a KNX bus system. They serve as the link for connection and data transmission between M-Bus meters (water, electricity, energy, etc.) and the KNX bus. The devices allow the connection and reading of up to three M-Bus devices and support up to 32 data points.
Key Features
- Up to 32 Data Points
For monitoring consumption, measurement values, as well as date and time - Date Information
Processes up to 3 date entries from M-Bus devices - Special Functions
Provides 3 data points for specific functions and customizations - Status Monitoring
One data point for displaying device status - M-Bus ID
- One data point for setting the M-Bus ID for connected devices (only for SK01, REG)
- Handles data from up to three M-Bus devices independently of their ID (SK08 only)
Technical Specifications and Datasheets can be found here:
Here you can request a non-binding offer:
HAN KNX Gateway
The KNX-GW-HAN-REG is a gateway designed for integrating smart meters with a HAN (Home Area Network) interface into a KNX bus system. This device is suited for applications requiring reliable and accurate energy measurement data from meters using HAN protocols.
Main Functions
- Data Integration
Connects HAN meters to KNX - Data Fetching
Retrieves values like active power, reactive power, and cumulative energy - Update Intervals
Configurable data update intervals (10 seconds to 1 hour) - Manufacturer Support
Compatible with Kaifa, Kamstrup, and AIDON meters - ETS Configuration
Configured via ETS software
Technical Specifications and Datasheets can be found here:
Here you can request a non-binding offer:
HAN P1 KNX Gateway
Our KNX HAN P1 gateway facilitates the integration of P1 interface meters into a KNX bus system. It supports a single P1 meter and up to four externally linked meters, making it suitable for various metering applications.
Main Functions
- Meter Integration
Connects one P1 meter and up to four external meters to KNX - Data Retrieval: Fetches and transmits values like active power, instantaneous current, and cumulative energy
- Update Options: Configurable data update intervals (10 seconds to 12 hours)
- ETS Configuration: All settings and parameters are configured via ETS software
Technical Specifications and Datasheets can be found here:
Here you can request a non-binding offer:
