| Smart Metering
KNX Heat Meter Dialog WZ SensoStar E with SK10 M-Bus Module
The water meter consists of a calibrated meter from NZR type "WZ-M" and a pulse counter module SK01-IMPZ1 from Arcus-EDS GmbH.

IMPZ : Pulse counting module with battery-buffered data memory and KNX bus coupler
M-BUS
KNX bus coupling of meters with M-Bus interface
The bus coupler represents a bus master of the M-Bus interface according to DIN EN 13757-2/3
MODBUS
KNX bus coupling of meters with Modbus/RTU interface
HAN | P1
The arcus-eds HAN gateways are slaves for the HAN-MBUS or HAN-P1 bus that are similar to the M-BUS.
with SK10 M-Bus Module
The compact single-beam heat meter dialog WZ R5.M used to detect the heat energy in a closed heating system.

Article : 6041-85223115
Article : 6041-85223125
ETS Application
Download ETS Application MBus-SensoStarE.knxproj:
Modularis WZ-M

ETS Application
Technical data
KNX-IMPZ-WZ-M
Operating Voltage | KNX bus voltage 21 .. 32 VDC |
Power Consumption | ca. 240 mW ( at 24VDC ) |
Auxiliary Supply | not required |
Bus Coupler | integrated |
Ambient Temperature Electronic Measuring Equipment Casing | Operation: -20 .. +55 °C Storage: -20 .. +85 °C |
Start-up with ETS | IMPZx.vd4 |
Curcuit Points | KNX 2-pole clamps ( red / black ) |
|
|
Protection Class | IP54/65 |
Assembly Type | Assembly with 2 screws finery |
Casing Type | Plastic housing grey |
Casing Dimensions | ( 72 x 64 x 40 ) mm |
Articles
KNX Heat Meter Dialog WZ SensoStar E with SK10 M-Bus Module
The water meter consists of a calibrated meter from NZR type "WZ-M" and a pulse counter module SK01-IMPZ1 from Arcus-EDS GmbH.

IMPZ : Pulse counting module with battery-buffered data memory and KNX bus coupler
M-BUS
KNX bus coupling of meters with M-Bus interface
The bus coupler represents a bus master of the M-Bus interface according to DIN EN 13757-2/3
MODBUS
KNX bus coupling of meters with Modbus/RTU interface
HAN | P1
The arcus-eds HAN gateways are slaves for the HAN-MBUS or HAN-P1 bus that are similar to the M-BUS.
with SK10 M-Bus Module
The compact single-beam heat meter dialog WZ R5.M used to detect the heat energy in a closed heating system.

Article : 6041-85223115
Article : 6041-85223125
ETS Application
Download ETS Application MBus-SensoStarE.knxproj:
Modularis WZ-M

ETS Application
Technical data
KNX-IMPZ-WZ-M
Operating Voltage | KNX bus voltage 21 .. 32 VDC |
Power Consumption | ca. 240 mW ( at 24VDC ) |
Auxiliary Supply | not required |
Bus Coupler | integrated |
Ambient Temperature Electronic Measuring Equipment Casing | Operation: -20 .. +55 °C Storage: -20 .. +85 °C |
Start-up with ETS | IMPZx.vd4 |
Curcuit Points | KNX 2-pole clamps ( red / black ) |
|
|
Protection Class | IP54/65 |
Assembly Type | Assembly with 2 screws finery |
Casing Type | Plastic housing grey |
Casing Dimensions | ( 72 x 64 x 40 ) mm |