New Application |
List of fans
Download ETS Application | Arcus_Lunos_Ex_v5
With the new application:
Arcus_Lunos_Ex_v5 from 02/2022 the list of fans will also be expanded.
The new application is only compatible with items 65001002 and 65001004!
Connection options for different LUNOS fan types
| Lüftertyp | L1.A | L1.B | L2.A | L2.B | |
|---|---|---|---|---|---|
| NEXXT | X | X | |||
| E² | X | X | X | X | paarweise |
| EGO S1[R] | X | X | |||
| EGO S2[L] | X | X | |||
| Silvento (FK, EC, 30/60/100) | X | X | |||
| RA 15-60 | X | X | |||
| ACM-Modul oder 0..12V | X | X |
It must be ensured that the e² fans are always connected to the same number of exhaust (A) and supply air fans (B) across all installations.
ETS Application
Technical data |
List of fans
| KNX-Lunos-Control4-IW | |
|---|---|
| Operating voltage | KNX Busvoltage 21 .. 32VDC |
| Power consumption (KNX) | ca. 120mW ( @ 24VDC ) |
| Bus voltage connection | KNX-2-pol Clamp ( red / black ) |
| Auxiliary voltage | 24V .. 32VDC 20W max. ( 5W / 10W / 15W / 20W @ 1..4 fans ) |
| Connection AUX-voltage | WAGO-Clamping block ( yellow / white ) |
| Electrical efficiency of module | 92% ( With maximum power ) |
| Button / switch input | 3mA Potential -free / debounced |
| Busoppler | integrated |
| Ambient temperature | storage -20 .. +85°C operation -5 .. +45°C |
| Humidity | up to 90% not condensing |
| Power reduction | Automatically from 75 ° C modul temperature |
| Commissioning with | ETS Arcus_Lunos_Ex_v5.knxprod |
| Protection class | IP20 |
| Installation of KNX module | Standard Inwall ( 60/68 ) mm |
| Housing of KNX module | Plastic black |
| Dimensions of KNX module | ( 50 x 50 x 20 ) mm ( B x H x T ) 58mm Diagonal |
| Article number | 65001002 |
For suitable ventilation devices with heat recovery as well as pure exhaust air devices, see Lunos Homepage (www.lunos.de).
## Commissioning
The KNX clamp is connected to the KNX bus via the supplied terminal block (red (+) / black (GND)).
The auxiliary voltage is connected via the supplied terminal block (yellow (+) / white (GND)). The fans are mounted according to the lunos specification and connected via the supplied preceded connector. Optionally, potential-free button / switch can be connected via the supplied connector.
Under no circumstances may the module be connected to mains voltage potential.The installation may only be carried out by a specialist.
 | Lüfteranschluß | ACM-Modul Anschluß |
|---|---|---|
| violet | violet | 0-10V |
| red | red | +12V |
| blue | blue | GND |
Connection options for different lunos fan types
| Fan-type | L1.A | L1.B | L2.A | L2.B | |
|---|---|---|---|---|---|
| NEXXT | X | X | |||
| E² | X | X | X | X | pairwise |
| EGO S1[R] | X | X | |||
| EGO S2[L] | X | X | |||
| Silvento (FK, EC, 30/60/100) | X | X | |||
| RA 15-60 | X | X | |||
| ACM-Modul or 0..12V | X | X |
REG 4TE
ETS Application
Download ETS Application | Arcus_Lunos_Ex_v5 |
Technical data |
List of fans
| KNX-Lunos-Control4-REG | |
|---|---|
| Operating voltage | KNX Busvoltage 21 .. 32VDC |
| Power consumption (KNX) | ca. 120mW ( @ 24VDC ) |
| Bus voltage connection | KNX-2-pol Clamp ( red / black ) |
| Auxiliary voltage | 24V .. 32VDC 20W max. ( 5W / 10W / 15W / 20W @ 1..4 fans ) |
| Connection AUX-voltage | WAGO-Clamping block ( yellow / white ) |
| Electrical efficiency of module | 92% ( With maximum power ) |
| Button / switch input | 3mA Potential -free / debounced |
| Busoppler | integrated |
| Ambient temperature | storage -20 .. +85°C operation -5 .. +45°C |
| Humidity | up to 90% not condensing |
| Power reduction | Automatically from 75 ° C modul temperature |
| Commissioning with | ETS Arcus_Lunos_Ex_v5.knxprod |
| Protection class | IP20 |
| Installation of KNX module | din-rail assembly |
| Housing of KNX module | Plastic black |
| Dimensions of KNX module | Standard DIN-rail-housing 4TE ( 72 mm ) |
| Article number | 65001004 |
For suitable ventilation devices with heat recovery as well as pure exhaust air devices, see Lunos Homepage (www.lunos.de).
Commissioning
The KNX clamp is connected to the KNX bus via the supplied terminal block (red (+) / black (GND)).
The auxiliary voltage is connected via a screw clamp.The fans are mounted according to the lunos specification and connected via the screw terminals.Optionally, potential-free button / switch can also be connected via screw terminals.
Under no circumstances may the module be connected to mains voltage potential.The installation may only be carried out by a specialist.
Connection options for different lunos fan types
| Fan-type | L1.A | L1.B | L2.A | L2.B | |
|---|---|---|---|---|---|
| NEXXT | X | X | |||
| E² | X | X | X | X | pairwise |
| EGO S1[R] | X | X | |||
| EGO S2[L] | X | X | |||
| Silvento (FK, EC, 30/60/100) | X | X | |||
| RA 15-60 | X | X | |||
| ACM-Modul or 0..12V | X | X |
It is important to ensure that with E² the same number of exhaust-(A) and supply air fans (B) are always connected across installation.