SK30-TTHC-R KNX-Sensor used for measuring and controlling indoor air parameters Applications: Detection and control of room temperature and humidity Decentralized control for steady KNX-valves or thermal actuators Decentralized ventilation control depending on humidity Detecting of component temperature and temperature control ( Terminal for external PT1000 ) to prevent condensation and structural damage Evaluation of external switches and push buttons for switching functions Functions: Air temperature ( sensor in the housing ) also weighted with external temperature Humidity ( sensor in the housing ) Calculated values absolute humidity, dew point temperature and energy content ( enthalpy ) Additional floor, ceiling or component temperature ( Terminal for external PT1000 ) Control functions for heating and cooling applications ( can be combined ) Setpoint temperatures for Comfort, Standby, Economy and Protection, selectable via KNX HVAC objects Setpoint change via rotary controller and/or objects Storage of minimum- and maximum-temperature Heat- and frost-alarm Limits for temperature and humidity Fan control by humidity limits and external inputs Detecting of dew point temperature and alarm / regulation at risk of condensation Adaptation for setpoint and maximum temperatures Controller output 0…100% or programmable PWM for thermal actuators Valve rinse function Second temperature controller as auxiliary controller Rotary controller Two binary inputs / outputs ( floating ) The current state of the temperature controller can be indicated by LED’s. Four logic blocks for the logical link between internal and external signals. Technical Data: Measurement temperature rel. humidity temperature ( PT1000, external ) Calculated Values abs. humidity dewpoint temperature enthalpie Control integrated Temperature Range -25 .. +80°C Resolution 0.02°C Accuracy ± 0.4°C (5..60°C), else ± 0.8°C Humidity Range 0 .. 100% r.H Resolution 0.02% r.h Accuracy ± 3% r.H ( 20..80% ) at +20°C, else ± 5% r.H Temperature Range ( PT1000, external ) -50 .. +400°C ( depending on the sensor used ) Resolution 0.02°C Accuracy depending on the sensor used Rotary Controller Setpoint adjustment ( max. ± 5°C ) Binary In / Output 2 Operating Voltage KNX bus voltage 21 .. 32VDC Power Consumption approx. 240mW ( at 24VDC ) Environment Temperature KNX-Module Operating: -25 .. +80°C Storage: -25 .. +80°C Environment Humidity KNX-Module 0 .. 100% r.H non condensing Bus Coupler integrated Startup with the ETS Version 4 or higher HLK305 Curcuit Points KNX 2 pole clamps ( red / black ) Protection Class IP20 Housing KNX-Module plastic Dimensions Housing KNX-Module 55mm standard frame size Article Number 30541351 white 30541352 anthrazit Brand Arcus-EDS