Neo-THC-x 
KNX-Sensor used for measuring and controlling indoor air parameters

Applications:
Detection and control of room temperature and humidity
Decentralized control for steady KNX-valves or thermal actuators
Decentralized ventilation control depending on humidity
Evaluation of external switches and push buttons for switching functions

Functions:
Air temperature ( sensor in the housing ) also weighted with external temperature
Humidity ( sensor in the housing )
Calculated values absolute humidity, dew point temperature and energy content ( enthalpy )
Control functions for heating and cooling applications ( can be combined )
Setpoint temperatures for Comfort, Standby, Economy and Protection, selectable via KNX HVAC objects
Setpoint change via objects
Storage of minimum- and maximum-temperature
Heat- and frost-alarm
Limits for temperature and humidity
Fan control by humidity limits and external inputs
Detecting of dew point temperature and alarm / regulation at risk of condensation
Adaptation for setpoint and maximum temperatures
Controller output 0…100% or programmable PWM for thermal actuators
Valve rinse function
Second temperature controller as auxiliary controller
Four binary inputs / outputs ( floating )
Four logic blocks for the logical link between internal and external signals.

Technical Data:
Measurement					Temperature 
						rel. Humidity
Calculated Values				abs. Humidity 
						Dewpoint Temperature 
						Enthalpie
Control						integrated
Temperature Range				-25 .. +80°C
Resolution					0.02°C
Accuracy					± 0.4°C (5..60°C), sonst ± 0.8°C
Humidity Range					0 .. 100% r.H
Resolution					0,02% r.H
Accuracy					± 3% r.H (20..80%) at +20°C, else ± 5% r.H
Binary In- / Output				4
Operating Voltage				KNX Bus Voltage 21 .. 32VDC
Power Consumption				approx. 240mW ( at 24VDC )
Environment Temperature KNX-Module		Operating: -25 .. +80°C Storage:	-25 .. +80°C
Environment Humidity KNX-Module			0 .. 100% r.H Non Condensing
Bus Coupler					integrated
Auxiliary Supply				not required
Startup with the ETS Version 4 or higher	HLK305
Curcuit Points					KNX 2-pole clamps ( red / black )
Protection Class				IP20
Housing KNX-Module				Cover aluminum anodized ( black ) 
						square:	( 80 x 80 x 6 ) mm
						round:	Ø 84 x 6 mm
						Standard flush-mounted socket ( 60/68 mm ) in the dry interior
	
Article Number					30531583 Aluminum, square, sanded 
						30531584 Aluminum, square, sanded, black 
						30531683 Aluminum, round, anodized 
						30531684 Aluminum, round, anodized, black 

Brand						Arcus-EDS