SK10-TC KNX-Sensor used for measuring and controlling indoor air temperature Applications: TO BE ADDED!!! Functions: Air temperature ( without sensor ) also weighted with external temperature Control functions for heating and cooling applications ( can be combined ) Setpoint temperatures for Comfort, Standby, Economy and Protection, selectable via KNX HVAC objects Setpoint change via objects Storage of minimum- and maximum-temperature Heat- and frost-alarm Limits for temperature Fan control by external inputs Adaptation for setpoint and maximum temperatures Controller output 0…100% or programmable PWM for thermal actuators Valve rinse function Second temperature controller as auxiliary controller Four logic blocks for the logical link between internal and external signals. Technical Data: Measurement Temperature Control Integrated Temperature Range -50 .. +400°C ( depending on the sensor used ) Resolution 0.02°C Accuracy depending on the sensor used Operating Voltage KNX Bus Voltage 21 .. 32VDC Power Consumption approx. 240mW ( at 24VDC ) Environment Temperature KNX-Module Operating: -25 .. +80°C Storage: -25 .. +80°C Environment Humidity KNX-Module 0 .. 100% r.H Non Condensing Bus Coupler Integrated Auxiliary Supply Not Required Startup with the ETS Version 4 or higher HLK305 Curcuit Points KNX 2-Pole Clamps ( red / black ) Protection Class IP54/65 Housing KNX-Module Plastic Dimensions Housing KNX-Module ( 72 x 64 x 40 ) mm Article Number 30510000 Brand Arcus-EDS